Location:
Home >
News > Courier bag making machine common problems and solutions!
Courier bag making machine common problems and solutions!
Click：55 Date：2024/4/24
Courier bags produced by courier bag making machines play an important role in our lives, especially in the e-commerce industry, the use of bag making machines is essential. Can produce a good quality courier bag, which has a lot to do with the quality of the courier bag making machine and whether it is used correctly. The wrong method of use not only affects production, but also causes problems with the courier bag making machine. Here are some common problems during use.
1, courier bag making machine heat sealing is not complete
This is mainly because the resin used in the inner seal layer is not suitable. In this case, it is only necessary to replace the resin type. As the bag making machine, an ionic resin, a metallocene polymer or the like can be used.
2, the seal is brittle or even broken
There are many reasons for this. For example, the pressure is too high, the heat sealing time is too long, or the edge of the bag making machine is too sharp, and the bottom sealing silicone rubber is too hard. When you encounter such a problem, you must first figure out what caused it, and then choose a countermeasure to solve it. For example, if the heat sealing time is too long, you can adjust the processing temperature and heat sealing time. If the silicone rubber is not suitable, replace the silicone rubber with a suitable hardness.
In short, the courier bag making machine should be operated according to the requirements, and the maintenance work should be done at the same time. this is very important.
Scan it